| Fuel Capacity |
12 gal (45 L) |
| Transmission |
Hydrostatic drive with dual 16cc variable displacement pumps; wheel motors |
| Drive |
Belt from engine to hydrostat input shafts; hydrostatic drive to wheels |
| Hydraulic Capacity |
0.65 gal. (2.5 L) capacity; oil cooler |
| Brakes |
Hydrostat provides dynamic braking; Drum-type parking brake |
| Steering |
Lever-type steering controls independent power to each wheel for moving, stopping and turning |
| Seat |
High-back, 4 point suspension seat with armrests, fore/aft adjustment; operator weight adjustment |
| Gauges and Controls |
Hourmeter; throttle; choke; key switch; PTO clutch switch; steering and traction control arms; parking brake lever |
| |
|
| Speed |
|
26hp Generac,
26hp LC Kawasaki,
37hp Kawasaki |
0 – 12.4 mph (19.9 km/h) forward;0 – 4 mph (6.4 km/h) reverse |
| 33 hp Generac |
0 – 13.5 mph (21.7 km/h) forward;0 – 4 mph (6.4 km/h) reverse |
| |
|
| Turning Radius |
True zero-turning radius |
| Frame |
7-gauge formed and welded steel |
| |
|
Cutting Decks |
|
| Cutting Width and Type |
52-in. (1.32-m), 61-in. (1.55-m) or 72-in. (1.83-m) side-discharge |
| Deck Construction |
DuraDeck™ with Extreme Discharge System. Welded 10-gauge steel with 7-gauge reinforcements and side skirts, molded rubber discharge chute. |
| Spindles |
Large top-mounted, 1-in. (25-mm) dia. shaft on maintenance-free ball bearings |
| Drive |
Belt from engine to center spindle; reinforced V-belt on split steel pulleys (48-in. deck) or split steel pulleys (52-in. and 61-in. decks) from center spindle to outboard spindles; 5.5-in. (140-mm) idler |
| Tires |
|
| 52-in. Deck |
23 x 10.50-12 4-Ply Turf Tread Drive Wheels |
| 61-in. Deck |
24 x 12-12 4-Ply Turf Tread Drive Wheels |
| 72-in. Deck |
24 x 12-12 4-Ply Turf Tread Drive Wheels |
| |
|
| Anti-Scalp Rollers |
|
| 52-in. Decks |
(6) 5 in. (127 mm): front and rear center, left and right front, left and right rear |
| 61-in. Decks |
(7) 5 in. (127 mm): (2) front center, left and rightfront, left and right rear, center rear |
| 72-in. Decks |
(4) 5 in. (127 mm): left and right front and rear;(2) 4-in. (102 mm): front and rear center |
| Productivity Rate / 8 Hours |
|
| 52-in. Deck |
Up to 30.56 acres (12.36 ha) at 9 mph (14.48 km/h) |
| 61-in. Deck |
Up to 35.52 acres (14.37 ha) at 9 mph (14.48 km/h) |
| 72-in. Deck |
Up to 41.92 acres (16.96 ha) at 9 mph(14.48 km/h) |
| |
|
| Height of Cut |
1.5 in. to 4.5 in. (38 mm to 114 mm) in 0.25-in.(6.4-mm) increments |
| |
|
| Blades (3) |
|
| 52-in. Deck |
18 in. (46 cm); .205 in. (5.2 mm) thick |
| 61-in. Deck |
21 in. (53 cm); .25 in. (6.4 mm) thick |
| 72-in. Deck |
24.5 in. (62.2 cm); .25 in. (6.4 mm) thick |
| |
|
Dimensions |
|
| |
|
| Length |
80 in. (2.03 m) |
| |
|
| Width |
|
| 52-in. Deck |
64.5 in. (1.6 m) with chute down; 58.25 in. (1.4 m) with chute up |
| 61-in. Deck |
72-in. (1.83-m) side-discharge 73 in. (1.9 m) with chute down; 62 in. (1.6 m) with chute up |
| 72-in. Deck |
84 in. (2.13 m) with chute down; 72 in. (1.83 m) with chute up |
| |
|
| Overall Height |
46.5 in. (1.2 m) |
